TB>  SA>  Yup, I am running the 'Enhanced' US SDL, You should see it
TB>  SA> around, if not
TB>  SA> you can get it here on this BBS as SDL0112A.ZIP (D/L or FREQ)
TB> What are the major differences between the 'enhanced' US SDL and the standa
TB> AUS one? I've flashed the modem with the 'enhanced' SDL and it seems to hav
TB> cured my dial tone detection problem (10/10 just then, used to get 7/10 wit
TB> the AUS SDL).
 Here it is.. (Well, what USR tells us)

11/1/95 Courier V.Everything Release Notes - changes since 7/5/95
=================================================================

New Features/Improvements

1.  V.34 leased line (&L1) mode supported.  If V.34 is disabled, 
    then leased-line mode works as it has in the past.

2.  Added S55 bit 7 to control Phase Roll Compensation.  This allows
    better connect rates when operating on lines with asymmetrical frequency 
    offset.  It is intended primarily for testing.

    Setting S55 bit 7 = 1 will enable Phase Roll Compensation, default is 
    disabled.   Note that this will _reduce_ performance if used on lines 
    that do not suffer from this type of impairment.

3.  Added 3 new fields to the ATI11 screen:  Near echo, Far echo, and
    Signal to Noise Ratio.

4.  Improved handling of inbound BREAK signal when Remote Access feature
    is enabled.

5.  Corrected V.34+ result codes when used with &A0.

========================================================================== 


 Thats also in the SDL's zip file  (May want to look next time :)

 Cya!
Steven

--- GEcho 1.00