Paul, at 21:35 on Jul 14 1996, you wrote to Bill Grimsley...

PS> 21:29:13  Calling Serendipity Inc, 3:623/630, 063-41-1859
PS> 21:29:36  CONNECT 31200/ARQ/V34/LAPM/V42BIS

Not sure exactly where you are, but that's a damn good connect to Poe's
board, especially given the problems he's been having with poor bandwidth
lines.  Looks like Telstra might have finally fixed them for him.

PS> Intermail set these at the init strings to use (I chaged M3 to M0)

PS> Init-1        
ATH0B0X7E0V1Q0M0&A3&B1&K3&M4&G2&H1&R2|
PS> Init-2         ATE1&N0&S0S0=0S7=45S10=40S11=45S19=2|
PS> Init-3

PS> Any thoughts on the above (being new to the Courier, I have not played
PS> with the init strings, still wading thru the manual :)

Massive overkill, IMO.  Some people init with a simple AT&F1&K3,
although I use ATZ with Binkley, having already written
AT&F1&K3&W manually (there's a good reason for this, as USR
modems actually store the baud [bit] rate in NVRAM, so you need to perform
an &W with DTE already locked to your preferred speed).

This is what I use (&F1 template defaults, plus &K3 to disable MNP5)...

-------------------------------------------------------------------------
ati4
USRobotics Courier V.Everything Settings...

   B0  C1  E1  F1  M1  Q0  V1  X7
   BAUD=115200 PARITY=N  WORDLEN=8
   DIAL=HUNT   ON HOOK   TIMER

   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &K3 
&L0  &M4  &N0
   &P0  &R2  &S0  &T5  &X0  &Y1  %N6  #CID=0

   S00=000  S01=000  S02=043  S03=013  S04=010  S05=008  S06=002  S07=060
   S08=002  S09=006  S10=007  S11=070  S12=050  S13=000  S14=000  S15=000
   S16=000  S17=000  S18=000  S19=000  S20=000  S21=010  S22=017  S23=019
   S24=150  S25=005  S26=001  S27=000  S28=008  S29=020  S30=000  S31=000
   S32=009  S33=000  S34=000  S35=000  S36=000  S37=000  S38=000  S39=000
   S40=000  S41=000  S42=126  S43=200  S44=015  S45=000  S46=000  S47=000
   S48=000  S49=000  S50=000  S51=000  S52=000  S53=000  S54=064  S55=000
   S56=000  S57=000  S58=000  S59=000  S60=000  S61=000  S62=000  S63=000
   S64=000  S65=000  S66=000  S67=000  S68=000  S69=000  S70=000

   LAST DIALED #:

OK

aty15
CURRENT DIPSWITCH SETTINGS
DIPSWITCH #1   OFF
DIPSWITCH #2   OFF
DIPSWITCH #3   ON
DIPSWITCH #4   OFF
DIPSWITCH #5   ON
DIPSWITCH #6   OFF
DIPSWITCH #7   OFF
DIPSWITCH #8   ON
DIPSWITCH #9   ON
DIPSWITCH #10  OFF

OK
------------------------------

DIP #5 is important - switching it ON disables auto-answer, which can't be
used if your Courier has adaptive answer enabled.

Regards, Bill
@EOT:

--- MsgedSQ/2 3.50