From: "Mel Bartels" 
To: "Atm-US \(E-mail\)" 
Reply-To: "Mel Bartels" 


>>>
Thanks for your comments. So if I omit crossing the wires crossways (I want
to maintain a flat profile of the upper ring, installing channels to
seperate the eyebolts would counteract that), will I quite likely have
vibrations along the optical axis? I suppose I'll try and see what I get...
<<<

The angle of the wire is reduced by half.  It is not so much that you WILL
see vibrations, but more along the lines of, the chances for vibration is
increased.  Still, if your diagonal hub is reasonably sized, I would not
anticipate objectional vibration.  The other issue is to maintain exact
collimation.

Mel Bartels

--- BBBS/NT v4.01 Flag-4