-=> Quoting Lee Randall to All <=-

 LR> I was given a warp ver3 and am having trouble getting it going on my
 LR> machine. I have a 486 (586), amibios, 8 meg ram, 250meg spare on the
 LR> hard disk (Quantum),1meg s3 graphics card running a vga monitor. I
 LR> can't get past the installation disk, I do get the os2 logo then after
 LR> a bit more loading the machine hangs. The cursor is left in the top
 LR> left hand of the screen and thats it time for a re-boot. I do have Dos
 LR> and win3.1 on the hard disk. 
 LR> Any constructive suggestions please?

More info is needed here ie: are you installing from a two floppys and
CDROM(probably)? What type of CD Drive do you have?
A stab in the dark I would say it is a CDROM Driver problem the latest
drivers can be obtained from any good OS/2 BBS or even directly from IBM
BBS in Sydney.
How long did it sit there doing nothing before you rebooted it?
I could be wrong about the CDROM Driver,If I read you right you say you
only get to the first Disk.
You could try turn off the internal and external cache in the BIOS as
recomended in the trouble-shooting Docs.Then turn it on again after
the install.Are you using Disk compression ? NO NO NO! Only Stacker
for OS/2 will work and I doubt you have that.

Later
--- Blue Wave/Max v2.20