From: Sergey Abaturov 
Subject: Re: Unable to mount a Volume
Date: 2000/06/23
Message-ID: #1/1
Content-Transfer-Encoding: 8bit
References: 
Content-Type: text/plain; charset=iso-8859-1
MIME-Version: 1.0
Newsgroups: fido.novell

"They had the MEMFRGFX.NLM patch loaded and Set Reserved Buffers Below 16 Meg =
200. If reserved buffers are set too high (the exact number is unique for each
machine, but is about 50-70 from what we have seen) they can cause memory
fragmentation, even with the patch loaded."
Source:  http://support.novell.com/servlet/Knowledgebase

"J�rg Tanner" wrote:

> Hello
>
> after we create a new volume and copy a lot of data on it, we are unable to
> mount the new volume. We get the error message:
>
> Insufficient memory for directory table.
> and
> Cache memory allocator out of available memory.
>
> We installed 1GB RAM and tested all cache settings, but couldn't mount the
> new volume. When we dismount an other Volume, we where able to mount the new
> one.
>
> Thanks for help
> regards
> J�rg Tanner
> juerg.tanner@tanner-informatik.ch