-=> Quoting Darryl Georgee to Colin Wheat <=-

 DG> Thankx muchly re my Sound Card probs. under OS2.
 DG> OK its a 486dx 2/66 with 16 meg. Ram, an ESDI HD,an Adaptec SCSI card
 DG> running my Sony 2X CD. The SB is supposed to be a "Vibra" card made
 DG> by Creative Labs. The OS is Warp ver 3.0. I've tried installing it
 DG> using the easy and the custom method. The ssytem recognises the
 DG> CD and the SCSI card BUT not the SB. The SB works OK under Dos and
 DG> Win3.11. I had to install something called an Intel Prog manager
 DG> (or could be config manager) B4 the SB installation prog. would work
 DG> Its something to do with "plug and play".
 DG> I did have the SB working once but when I shut the system down and
 DG> rebooted it wouldnt work again. The config.sys files stops at the line
 DG> Dev=c:\os2\mmos2\sb16.ssy or wotever. I'm really happy with OS2 but
 DG> cant see why this SB is giving me so much trouble. Bye 4 now anyway.
 I have a I-A16C Audio card that has the Creative labs
 ViBRA 16C PnP Audio chip on it so its probably the same prob I had.
 for mine the two progs that were stuffing it up
 CTCM.EXE and CTCU.EXE

 CTCU is the major pain in the arse it wont run properly under OS/2.
 When I install the drivers to OS/2 the came up with the wrong IRQ
 eg:IRQ3 and I could not change it as the prog to change it was CTCU.EXE
 I was running HPFS so I could not boot DOS change drives and then run it?
 had me stumped for a while until I desided to cope the file CTPNP.cfg and
 there was another I think from my working DOS partition over the bodgy one's
 in the OS/2 partition. Rebooted and all was well. I hope you have same files
 good luck anyway and seeya.

 PS this is the file CTPNP.CFG

 [PNP]
 ReadPort=20b
 BypassPnPOS=0

 [SB16]
 Disable=0
 Csn=1
 CardId=CTL0070
 Serial=ffffffff
 LogDev=0
 Port0=220
 Port1=330
 Irq0=5
 Dma0=1
 Dma1=5

 [GAMEPORT]
 Disable=0
 Csn=1
 CardId=CTL0070
 Serial=ffffffff
 LogDev=1
 Port0=200


___ Blue Wave/QWK v2.20

--- Maximus/2 3.00