Hello Bill,

One of our members is having difficulties connecting to the NetComm M34F
here at better than 1200 bps.  I am not familiar with this modem so my
suggestion is to lock the modem to 28.8 using a Bxy command.  I haven't
seen a manual for these modems and, while the settings look ok, I'm only
guessing.

I have seen that you have used one of these modems - can you advise what
changes he should make to his settings to connect at more reasonable
speeds?

Thanks for your help.

The KTX modem profile is below:-

at&vACTIVE PROFILE:
B0 E1 L2 M1 Q0 T V1 X4 Y0 &C1 &D2 &E0 &G0 &L0 &M0
&O0 &P1 &R0 &S0 &X0 &Y0
%A000 %C1 %D1 %E1 %P0 %S0 \A3 \C0 \E0 \G0 \J0 \K5 \N6 \Q3 \T000 \V1 \X0
S00:003 S01:000 S06:003 S07:045 S08:002 S09:006 S10:014 S11:085 S12:050
S16:1FH S18:000 S21:30H S22:F6H S23:19H S25:005 S26:001 S27:10H S28:00H

STORED PROFILE 0:
B0 E1 L2 M1 Q0 T V1 X4 Y0 &C1 &D2 &E0 &G0 &L0 &M0
&O0 &P1 &R0 &S0 &X0
%A000 %C1 %D1 %E1 %P0 %S0 \A3 \C0 \E0 \G0 \J0 \K5 \N6 \Q3 \T000 \V1 \X0
S00:003 S16:1FH S21:30H S22:F6H S23:17H S25:005 S26:001 S27:000 S28:000

STORED PROFILE 1:
B0 E0 L2 M1 Q0 T V1 X4 Y0 &C1 &D2 &E0 &G0 &L0 &M0
&O0 &P1 &R0 &S0 &X0
%A000 %C1 %D1 %E1 %P0 %S0 \A3 \C0 \E0 \G0 \J0 \K5 \N6 \Q3 \T000 \V1 \X0
S00:003 S16:1FH S21:30H S22:F6H S23:19H S25:005 S26:001 S27:000 S28:000

TELEPHONE NUMBERS:
&Z0=
&Z1=
&Z2=
&Z3=

OK
atI9
F-1128V/R6 (AL) V7.05

MODEM CHIP : ROCKWELL RC288DPi

FAX CLASS 1 AND CLASS 2

300485

OK

Regards ... John
@EOT:

--- MsgedSQ/2 3.30