MBl>>> I'm not familiar with the ISDN modems. More info might help
MBl>>> evaluate whether it's possible/practical to disable the CD
MBl>>> routines.
 
MBi>>> This sounds like a job for a piece of wire.
 
MB>> If you need DCD asserted, wire the pin to whichever other pin is
MB>> convenient.
 
DH>> That's a bit difficult across an ethernet cable.  The ISDN
DH>> setups I have operate via Cisco 1003 routers.  The function
DH>> exists - but it's "different".
 
MB> Why are you using the dialer at all, then?
 
Because that's the only way to coax the Cisco to connect at ISDN.
 
No dial, no connect.
 
DH>> "Transport" needs to be handled in a pretty generic way if
DH>> it's to survive in all of the Modem/Cable
DH>> modem/ISDN/T1/EtherNet environments.  So does node
DH>> addressing.  Workin' on it.
 
MB> Maybe I'm not following what it is that you are doing?
 
At the moment, trying to understand / make use of the potential on ISDN
interfaced Cisco 1003's.   Watch this space, there will be further
developments after this primary task completes...:-)
 
Regards,
Dave Hatch.

--- DB A3000sl/001347