* An ongoing debate between Kenneth E Boys and All rages on ...

| KB> Renegade and I see the signal is getting there but it looks strange.
| KB> Rather than ATA, it looks something like "uz."  If I hit
A for answer,
| KB> it accepts the call and I am quite able to log on.  Seems really

| KB>     I am sure the settings for the modem are correct in both
| KB> InterMail and Renegade (Com 1, Int 4, address 3f8) but I just can't
| KB> get it to answer the call.  I did try Int 2 and 3 as well but no

Intermail should have "RING|" (no quotes) for Ring string. Init
should include
the chars S0=0 (no auto answer, let Intermail do it) and Answer should be set
to ATA|. If you're on the wrong COM port, then try COM2 (Irq 3, 2F8) otherwise
IRQ 4 (3F8) is correct for COM1 .

I use a Courier V.Everything with Intermail and Wildcat and it works just fine.
The only problem I had is that Init should start with AT&F1... and Reset should
be ATZ (my old modem had a Rockwell chip and used &F0 for both).

--
Be well    :^)

 : Ben   aka cMech    http://bellsouthpwp.net/c/m/cmech617/
 :
 +    WildCat! Board 24/7  +1-337-232-4155  V92 56k  8,N,1
--- GoldEd+/DOS v1.1.5cM