Howdy Ben:

KB> Renegade and I see the signal is getting there but it looks strange.
KB> Rather than ATA, it looks something like "uz."  If I hit A
for answer,
KB> it accepts the call and I am quite able to log on.  Seems really

KB>     I am sure the settings for the modem are correct in both
KB> InterMail and Renegade (Com 1, Int 4, address 3f8) but I just can't
KB> get it to answer the call.  I did try Int 2 and 3 as well but no good.

B>  Intermail should have "RING|" (no quotes) for Ring string.
Init should 
B> include the chars S0=0 (no auto answer, let Intermail do it) and Answer 
B> should be set to ATA|. If you're on the wrong COM port, then try 
B> COM2 (Irq 3, 2F8) otherwise IRQ 4 (3F8) is correct for COM1 .
B> 
B> I use a Courier V.Everything with Intermail and Wildcat and it works just 
B> fine.  The only problem I had is that Init should start with AT&F1... and 
B> Reset should be ATZ (my old modem had a Rockwell chip and used 
B> &F0 for both).

    I double and triple checked and I am sure the Com port and IRQ entries are
correct in both Renegade and InterMail.  Here is what setup looks like in 
Applications/Modem/Commands.  InterMail wrote these strings when I selected 
"USRobotics Courier DS V.Everything 28.8K."  Any recommendations?:  

+-[_]--------------- Modem #001: Commands --------------------+_
¦                                                             ¦_
¦  Init 1         
ATH0B0E0M3Q0V1X6&A2&B1&G2&H1&K0&M4&N0|     ¦_
¦  Init 2          AT&R2&S0S0=0S7=55S10=40S15=8S19=2S28=10|   ¦_
¦  Init 3          ATZ|                                       ¦_
¦  Terminal init                                              ¦_
¦  Answer          ATA|                                       ¦_
¦  Down            AT|                                        ¦_
¦  Reset speed     AT|                                        ¦_
¦  Escape code     +++                                        ¦_
¦  Return on-line  ~ATO|                                      ¦_
¦  Onhook          ATH0|                                      ¦_
¦  Offhook         ~ATM0H1|                                   ¦_
¦  Dial command    ATDT                                       ¦_
¦    Prefix                                                   ¦_
¦    Suffix        |                                          ¦_
¦  Command delay   3                                          ¦_
¦                  [ ] Delay between characters               ¦_
¦                                                             ¦_
¦                                         OK   _    Cancel _  ¦_
¦                                       ________    ________  ¦_
+-------------------------------------------------------------+_

    I guess I am a bit slow … can’t find anything that says
"RING."  Are you 
suggesting "RING" should be somewhere in the Init strings?

Regards,

Ken

--- GEcho 1.02+