Hello Ian!
On 29 Aug 97, Ian Macaulay wrote to Rich Lockyer:
 IM> I usually use these type hinges or a cloth type madfe from two sheets of
 IM> pre glued material sewed down the center.
You old fart ~8-)
 IM> sig or whatever I have always just ca'd them.
I've never had good luck with CA on that type... they're almost a Teflon and 
don't really like glue.  Epoxy tends to work, but only because it gets 
through the holes and bonds the wood all the way through.  I would think that 
CA may be too brittle, though you might get by with thick CA and no 
accelerator.  Even when I've used epoxy, I've still pinned them.
 IM> But of course my ships have
 IM> never been tested in flight.
You've STILL never flown?  You're worse than me!  At least I used to get in 
one flight a week per bird.  The slopers were a different story completely... 
if there was lift, you couldn't keep me out of the air and I'd do my best to 
buy radios with frequencies that nobody else had to make sure I had the hill 
to myself all day.
 IM> You know anything of Larry marshall on Inet?  I can't find a group with
 IM> any of his comments in it.
I haven't looked into the RC groups on the net... just guitar and tube amp 
related stuff.  If you can receive netmail, I'll send you his address 
(provided I can still find it).
C-ya! Rich
--- GoldED 2.40
---------------