Hola Vitaliy!



El 01-Nov-98 a las 21:11:00, Vitaliy Tsirkounov le escrib¡a a All
sobre tcp/ip

 VT> Hello, All!

 VT> Is there anybody here?

 VT> I have installed: -Client for Microsoft Networks -PCI Ethernet
 VT> Adapter        (My Network Card) -TCP/IP -File and printer sharing
 VT> for Microsoft Networks

 VT> But W'95 don't want to connect to another computer. Why?

 VT> PS: I'm sure that there is no problem with W'98 because I had
 VT> network when I had W'98 on both computers!

 In the TCP/IP->Yournetworkcard properities you have to set your IP 
 number and netmask under the 'IP address' section (select 'specify 
 an IP adress' radio button). In one computer, you can choose 10.0.0.1 
 and in the other 10.0.0.2. In the netmask, choose 255.255.255.0 in 
 both computers.
 Now close all, reboot the computers and try to do:
 ping 10.0.0.2 (from the 10.0.0.1 machine) and
 ping 10.0.0.1 (from the 10.0.0.2 machine) (under a DOS window).
 If there isn't 'time out' messages, everything is ok.

 BTW: If you want to share printers and files, you have to install 
 the NetBEUI protocol.

 VT> Sory for bad English :(
 Mine is worst :(((

e-mail: eviera{at}infovia.com.ar

--- Terminate 5.00/Pro