MS> WM> Could anyone tell me what might cause my u/l to be considerably 
lower
  > WM> than d/l.  I am using QmPro 1.53 and am unable to find anything in 
he
  > WM> config that looks wrong.  Thank you in advance for any help you can
  > WM> give.
MS>this is common to any kind of zmodem transfer, no matter what kind of comm
  >program you have.  it has to do with which modem has control of the flow, 
so
  >in general your d/l will go faster than u/l if you have a good modem.  
there
  >is usually a difference of 20 cps between d/l and u/l on my system.  if 
ther
  >is a considerable change in speed on your system, just check and make sure 
y
  >have cts/rts and the other proper settings selected.  if that doesnt help, 
a
  >the person you are connecting with to use cts/rts (hardware flow control).
  >-o. mike .o-
Thank you very much for the information!  Since the difference in my u/l
and d/l transfer speed is 20 cps, guess everything must be as it should
be.  BTW, are you using Win95 and if you are, any conflict with QmPro?
Wayne
---
 þ QMPro 1.53 þ A little LAN will do it!
--- T.A.G. 2.7c Standard
---------------