On Thu 17-Oct-1996  9:37a, Timothy Trace wrote:
TT> Greetings:
TT> Is there any way to select which modem is going to be used by the
TT> current instance of QModem via the command line settings?
 
yeah go into QInstall Menu and at the top left bar use your arrow from 
the keyboard to move it to where it need to be....
-----------------------------------------------------------------------------
Video     Modem     Dirs    Host     Protocols     Files    Options     Exit
-----------------------------------------------------------------------------
      Comm Parameters
      Modem Commands
        Port SetUp
         Reserved
     Quick Modem Config
          ToGGles
 
okay 1st go into QInstall and go into Modem select and go into Quick Modem 
Config and it will give you list of modem that you have already inside the
machine or outside....then once you find the right one then go into Comm
Parameters and check the right setting if it wrong then you can fix it you 
don't have to go back to Quick Modem Config at least you need to...
then go to Exit and Save it but anytime you go into those setting and want 
to get out press ESC key hope i answer to your question right........let me
know
 
Charles
--- CNet/3
---------------