--- In os2hardware{at}yahoogroups.com, Ed Durrant  wrote:
>
> dwl100tr wrote:
> > --- In os2hardware{at}yahoogroups.com, Steve Wendt  wrote:
> >   
> >> On Fri, 14 Mar 2008, dwl100tr wrote:
> >>
> >>     
> >>> I've recently put a SBLive card in my machine but have problems!
> >>>
> >>> I disabled on-board ADI Soundmax in the BIOS, used
minstall to reset
> >>> my  installation back to no sound card and then used minstall
again to
> >>> load the UNIAUD drivers.
> >>>
> >>> On reboot the card was recognised & drivers loaded but I get no
sound.
> >>>       
> >> What version did you install?  Try UniAud 114rc1.
> >>     
> >
> > Hi Steve,
> >
> > I tried the version from eCS RC4 - do you mean try the version on
eCS RC1?
> >
> > Since posting this first message I have tried the SBLive driver and my
> > CD drive now plays audio CDs perfectly - but all digital sound result
> > in a series of popping noises.  Any ideas why that should be?
> >
> > Dave
> >
> >
> >   
> Uniaud only supports WAV files, not MID files (perhaps the SB drivers 
> have similar problems) - is that the issue ? If not, please consider my 
> previous e-mail that this could be an IRQ issue - My SB Live used to 
> have issues with trying to share an IRQ.
> 
> Cheers/2
> 
> Ed.
> >
> >
>
I'm not trying to play MIDI files.  UNIAUD caused a TRAP so I went
back to SBLive.  As  I said, loads fine.  Hardware manager sees the
card.  It does share IRQs (11) with USB but, even if I rem out the USB
entries I still get the same problem so I don't think it is a
conflict.  I can't assign an IRQ in my BIOS.

The card is producing sounds but they sound just like pops & crackles
although the audio CDs are perfect.

Dave


------------------------------------

Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/


---