* Forwarded (from: o2hardl) by mark lewis using timEd/2 1.10.y2k+.
* Originally from Vince Coen to to-os2hardwarel.
* Original dated: Sat Mar 01, 20:42


Hello Kevin!

01 Mar 08 11:22, you wrote to All:


 KJ> My machine is crashing when writing to the Harddrives. The Bios is set
 KJ> for 133 mhz, but the hard drives are Seagate and rated at 100 mhz.

 KJ> After perusing the Bios I do not see any option to lower the Bios Buss
 KJ> speed to 100 mhz, although there appear to be options to overclock and
 KJ> have multipliers of 200 300 400 etc.

The Bus speed is not the speed of communications for the IDE interface. Check 
the specifications for the IDE controller and see what speed it will go to. If
the m/b is less than a year old it should go to 133 but older boards can be as
low as 33 or 66.  If it is the later you can download a utility from the 
seagate web site that will reduce the speed of the drives.

 KJ> There are DMA, ULTRADMA PIO modes etc., all bewildering, can anyone
 KJ> suggest an approach to this problem.

Leave all this set to the default for the moment, get the IDE and drives 
sorted first.

 KJ> The motherboard is PCCHIPS P23G 1.0, with a 3.33gig Celeron D




Vince
--
| Fidonet:  Vince Coen 2:250/1
| Internet: Vince.Coen{at}2-250-1-0.ftn.wpusa.dynip.com
| via Waldo's Place USA FidonetInternet Gateway Site
| Standard disclaimer: The views of this user are strictly his own.

---


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---