dwl100tr wrote:
> Hi,
>
> I've recently put a SBLive card in my machine but have problems!
>
> I disabled on-board ADI Soundmax in the BIOS, used minstall to reset
> my  installation back to no sound card and then used minstall again to
> load the UNIAUD drivers.
>
> On reboot the card was recognised & drivers loaded but I get no sound.
> I have also tried the procedure with the SBLive drivers and, again,
> the card is recognised but with these drivers I just get strange noises.
>
> I've searched the web but can't find anything out there that really
> helps.  I noticed that minstall didn't copy over uniaud.dll or
> unimixpm.exe - both of which appear to be needed in the few sites I've
> found which do have some reference to this problem, but I'm not really
> sure where they belong.  I put the dll in mmos2\dll and the exe in
> mmos2.  I can get the mixer to load but still no sound.
>
> Can anyone point me in the right direction??
>
> Thanks in advance,
>
> Dave Lister
>
>
>
>   
Does hardware manager see the card ?

If not check you haven't run out of IRQs - if your MB Bios allows it 
reserve IRQ5 for the PCI Slot where the card is plugged into

Cheers/2

Ed.
>
>   


------------------------------------

Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/


---