* From  : Marc Carrano
* To    : Shawn Highfield
* About : Re: net2bbs/netfoss
* On    : Jul 09 2011, At 18:39:00

Hi Marc,

 MC> I have a couple of questions

 MC> 1. what version of Ezycom do I download for the full install


v2.00 is the full release.  You are welcome to stay on v2.00 until the
next full release, or you can upgrade to the Gamma versions. If you
choose to upgrade to the gamma versions, you must follow the
instructions included with each gamma version. The instructions can be
found in the included WHATSNEW file.

 MC> 2. do I just use AT%DT for the modom Int?

This is my setup - worked fine when I had dialup...

Comport                 : 1
Maximum Baud Rate       : 38400
Locked Port             : Yes
Lower DTR when BUSY     : No
Off Hook                : Yes
Init Response           : OK
Ring String             : RING
Modem Delay             : 50
Force Answer            : Yes
Answer Delay (1/10s)    : 50
Start Time              : 00:00
End   Time              : 00:00
Init Tries              : 1
Init String 1           : ATZ|
Init String 2           : [UnUsed]
Set Busy String         : ATH1|
Manual Answer String    : ATA|
No Carrier String       : NO CARRIER
Fax Connect String      : FAX
Send BREAK to Modem     : No


Hope this helps...

Cheers ...

... "Happy DeathDay to Rimmer!" -- Lister, The Cat, and Holly
--- Ezycom V2.15g3 01FB0256