Kevin Johnson wrote:
> Hi,
>
> My machine is crashing when writing to the Harddrives. The Bios is set
for 133 mhz, but the hard drives are Seagate and rated at 100 mhz. (see
below 100MB/second = ATA5 == UDMA5]
>
> After perusing the Bios I do not see any option to lower the Bios Buss
speed to 100 mhz, although there appear to be options to overclock and have
multipliers of 200 300 400 etc.
>
> There are DMA, ULTRADMA PIO modes etc., all bewildering, can anyone
suggest an approach to this problem.
>
> The motherboard is PCCHIPS P23G 1.0, with a 3.33gig Celeron D
>
> All advice appreciated.
>
> Thanks
>
> KevinJ.
>
>   
Hi Kevin,

You're confusing Bus-speed (memory/CPU related) with mamimum (burst) HDD 
transfer speed! ;-)
A 10Ghz system can still read off an (old - IDE/SCSI) HDD with even 
200KB/sec transfer rate - it would just read and write a disk that old 
very *slowly* - but if disk and FS on it were undamaged - it would still 
read it correctly!

Regards,
Mike


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---