From: Aplanatic{at}aol.com
To: atm{at}shore.net
Reply-To: Aplanatic{at}aol.com


Hi James,

If you can index from a known screw phase then you can make a test run and
use these data for screw calibration.  Of course, first make sure that the
micrometer axis is aligned with the tester's axis.  As it is, you have
roughly a 1-2% error in measuring the LA.  An error mechanism of this
magnitude is certainly worth reducing.

Dave Rowe

> A suggested, I ran a micrometer test against the longitudinal axis of Robo2
> today. 

--- BBBS/NT v4.01 Flag-5